Anti Strongest Chemical Laboratory Bench Top Trespa Theet For Chemical Laboratory
TRESPA (thousand thought board) brief introduction 1. what is called the thousand thought board thousand thought board is a parallel plate made of wood fiber reinforced by a thermosetting resin base material under high temperature and high pressure. Special technology is used to make the material have an integrated decorative surface of Melamine. The classification of 2 thousand thought plate 3. laboratory using Trespa Athlon performance A. surface wear resistance according to the BS EN 438-2/91 experiment proved that Trespa Athlon has a very strong surface wear resistance, especially suitable for high frequency and often cleaning places. The special surface structure and durability of the B. scratch resistant Trespa Athlon make it excellent for its engraving, even in high load use, the sheet can maintain its appearance for a long time. C. easy to clean compact and non porous Trespa Athlon surface does not adsorb dust, that is to say can be easy to clean, because of good chemical corrosion resistance, so you can use general cleaning agent or strong corrosive disinfectant to clean the same can also use organic solvents to remove scribbling marks. This has no effect on the color of the plate. D. good chemical resistant Trespa Athlon has strong resistance to such organic solvents as acetone and xylene and similar substances. The plates are also resistant to disinfectants, chemical cleaners, fruit juice and dye erosion, and have no effect on the surface and performance. E. moisture proof Trespa Athlon is not affected by the adverse effects of wet environment, and is not affected by weather, mildew and corrosion. Special thermosetting resins are used on both sides of Trespa Athlon and core material, so that the material is not affected by moisture. Trespa Athlon has the same dimensional stability and workability as hardwood.F. impact resistant homogeneous solid core material and cyanamide resin reinforced surface give plate extraordinary impact resistance. G. fire resistance is based on BS EN438-2/91, the surface of Trespa Athlon contacts with the burning butt without damage, and the sheet will not fire or spalling. All Trespa Athlon disasters are the same as hardwood. They will not melt, drop or explode in the fire and will remain stable for a long time. H. antistatic in accordance with DIN 51953 and DIN 53482, Trespa Athlon is designed to be an anti-static material. I. Radiation protection Trespa Athlon can not be crossed by X ray, so it is also used in the medical department. J. environmental protection sheet materials can be disposed of or used as ordinary building materials and waste materials. If the industrial incinerator (temperature is greater than 720 degrees Celsius), it will not release any toxic and harmful gases, and it can also get energy again. 4. the performance of Trespa Meteon for external decoration is A. The outstanding curtain wall material Trespa Meteon has very strong weather resistance, regardless of sunshine, Yu Lin (even acid rain), or tide gas have no effect on the surface and substrate.
B. anti ultraviolet Trespa Meteon has excellent protection ability for ultraviolet rays in the sun. Outdoor tests in Florida coast and heavy industrial pollution areas and 3000 hour xenon lamp irradiation experiments completed by ISO4892 prove that Trespa Meteon has a good color stability, grading according to the standard international gray level of ISO4892: its grade In 4-5, and under the worst climate conditions, Trespa Meteon color will not change practically for more than ten years. C. temperature adaption uses the Trespa Meteon of thermosetting resin to change the intense temperature difference. Even if the temperature changes from -20 C to 80 C, it will not affect the appearance and stability of the plate. D. moisture-resistant Trespa Meteon will not be affected by moisture or mildew and rot due to climate change. The dimensional stability of Trespa Meteon is the same as that of hardwood. E. plates that are easy to clean, compact, and porous will not absorb dust in extreme environments, such as in places where air is seriously polluted. If it is contaminated, it can be cleaned easily with organic solvents without any effect on color. The impact resistance of F. impact Trespa Meteon is derived from its high modulus of elasticity, tensile strength and flexural strength. Homogeneous and high density core material gives high anchorage strength of Trespa Meteon. This performance is particularly important for plates with bolts or plug-ins that are not visible. G. experiment and verification Trespa Meteon meets sandbag impact test and pellet impact test conducted in accordance with British standard BS 6206.The panel used for balcony panel series must meet the requirements of the experiment and prove that it has good impact resistance. Trespa Meteon can fully meet this requirement. H. fire resistance Trespa Meteon can remain stable for a long time in the fire, and will not melt, drop or explode. I. chemical corrosion resistant Trespa Meteon is resistant to chemical corrosion and is not affected by household detergents and high strength organic solvents.Similarly, chemical pollution such as acid rain can not corrode the surface of Trespa Meteon. J. environmental protection Trespa Meteon contains 30% thermosetting resin and 70% wood fiber. The plate does not release any gas or liquid material. The corner waste of Trespa Meteon can be stored or recycled or decomposed to other building materials. K. edge processing M is easy to maintain. No need to coat or protect the surface or surface. Standard machines for hardwood processing can complete processes such as cutting, drilling and milling. It can be used when cutting, drilling and carving on board. The scope of application of 5 thousand thinking board M (Trespa Meteon) A. decorative exterior wall B. balcony, open-air platform, long corridor and other related uses C. Laboratory of M (Trespa Meteon) size :3000*1500mm,2440*1220mm.or cusomized as clients.
Product Name | trespa board | |
Size | 1220x2440mm , 1500*3000 mm or as clients requirement | |
Thickness | 13~50mm | |
Thickness Tolerance | +/-0.5mm | |
Face/Back | The Trespa plate is a homogeneous high strength plate made of thermosetting resin and wood fiber by high temperature and high pressure polymerization. | |
Surface Treatment | Matt, textured, glossy or embossed | |
Color | Solid color (such as white, red, blue, orange, green, ect.) & wood grain (such as beech, cherry, walnut, teak, oak, maple, sapele, ect.) & cloth grain & marble grain. More than 1000 kinds color are available. | |
Thickness | 0.5~1mm | |
Base Board | Plain MDF, plain particle board, block board or plywood (both side well sanded) | |
Glue | E0, E1 or E2 | |
Grade | A grade or as clients requirement | |
Density | MDF | 700~750kg/m3 |
Particle Board | 660~700kg/m3 | |
Block Board or Plywood | 500~680kg/m3 | |
Edge Designs | Right angle, bullnose, half bullnose, bevel, double belvel, bevel bullnose, radious or double radious designs. At the four sides of the countertop, it could be treated as: A: One side (front side) is post-formed, the rest three sides are PVC edge banding bonded. B: Two sides (front and its opposite side) are post-formed, the rest two sides are PVC edge banding bonded. C: Four sides are PVC edge banding bonded. |
|
Packing | Loose packing | |
Standard export pallet packing | ||
MOQ | 1x20’FCL | |
Supply Ability | 5000cbm/month |