What is Overall Planning for Full Steel Laboratory Benches
JIANGXI HUAZHIJUN TECHNOLOGY CO., LTD has excellent technical personnel who can tailor the products needed for your laboratory. The safe overall design, functional products, and aesthetically pleasing and practical styles serve as the basis for planning your Full Steel Laboratory Benches.
Please refer to the configuration method of the standard laboratory:
In the center of the laboratory, this is the space for setting up the central laboratory bench. Usually, a washing table is set up on the longitudinal side or in the middle of the central laboratory bench, with a reagent rack on it. A universal exhaust hood can also be installed.
On the right side by the window, there are side Full Steel Laboratory Benches, work benches, balance benches, side reagent racks, combination racks and wall cabinets
On the right side close to the door, a fume hood, laboratory bench, washing table, drying rack, medicine cabinet and storage cabinet should be set up (the position of the fume hood should be convenient for the connection of ventilation ducts).
Safety equipment such as emergency showers, eyewash stations and fire extinguishers are usually placed on the left and right sides of the four doors.
On the left side close to the door, a fume hood, a side laboratory bench, a side reagent rack, a washing table and a wall cabinet are set up to accommodate large facilities and equipment.
On the left side of the window, there are Full Steel Laboratory Benches, work tables, reagent racks on the side tables, and places for placing large devices and equipment.
The space under the 7-window position can be used to set up side tables, test tables, and microscope tables, providing good vision during operation.
Laboratory classification layout plan
In modern experimental research institutions, laboratories are usually classified into physics, general chemistry, organic synthesis chemistry, and biology. When choosing equipment for graphic design, laboratories in different fields have different requirements, and the differences can be quite significant.
When designing a chemical analysis laboratory, a central bench for two-sided operation is usually placed in the center of the laboratory, with side benches, test benches, fume hoods, reagent cabinets, drying cabinets, etc. on both sides. Purification benches and constant temperature and humidity equipment are also provided as needed.
With the development of the physics industries such as pharmaceuticals, medicine, food, agriculture, forestry and animal husbandry, a highly reliable sterile and dust-free environment is indispensable in the laboratories of these fields. In a biological laboratory, consider the special requirements of data processing workflows ranging from general to inspection, testing, photography, photo development, etc. Usually, the washing counter and the drying counter can be coordinated at the inlet.
On the central Full Steel Laboratory Benches and side benches, reagent racks and universal supports are installed to place reaction tubes, extraction tubes and other equipment for different experimental purposes. Additionally, special gas piping and water supply and drainage pipes for cooling should be introduced on the laboratory benches. Universal supports for fixing equipment can also be installed inside the fume hood.
To facilitate the operation and use of analytical instruments, single-sided instrument benches are often placed in the center of the laboratory, while test benches are installed on the exterior walls. The piping for special gases used by analytical instruments should be as close as possible to the instruments.
Construction of laboratory facilities
I. Key Points for Laboratory Facility Construction
In terms of the safety of people, objects and the external environment, the comfort of the environment such as noise, odor and vision, the operability and functionality of equipment, as well as the convenience and intelligence of information processing, which are different from ordinary buildings, we have excellent designs and high-quality equipment to meet these requirements.
Ii. Electrical, water and gas piping
The piping methods for electricity, water, gas, etc. in a laboratory are of great significance during the design process. They must be comprehensively considered based on the content of the laboratory, the architectural form (high-rise or bungalow), as well as future expansion, safety, budget, and functionality. Through extensive practice, we can provide design and construction services for piping systems.
Iii. Supply Methods of Electricity, Water and Gas
There are generally two ways to supply power, water and gas to laboratories: horizontal supply and vertical supply. Take the central laboratory bench as an example to show the supply mode for the laboratory bench. For more Details : Email: chinalabfurniture@foxmail.com, Whatsapp : 0086 19970724683 .
What is Overall Planning for Full Steel Laboratory Benches
JIANGXI HUAZHIJUN TECHNOLOGY CO., LTD has excellent technical personnel who can tailor the products needed for your laboratory. The safe overall design, functional products, and aesthetically pleasing and practical styles serve as the basis for planning your Full Steel Laboratory Benches.
Please refer to the configuration method of the standard laboratory:
In the center of the laboratory, this is the space for setting up the central laboratory bench. Usually, a washing table is set up on the longitudinal side or in the middle of the central laboratory bench, with a reagent rack on it. A universal exhaust hood can also be installed.
On the right side by the window, there are side Full Steel Laboratory Benches, work benches, balance benches, side reagent racks, combination racks and wall cabinets
On the right side close to the door, a fume hood, laboratory bench, washing table, drying rack, medicine cabinet and storage cabinet should be set up (the position of the fume hood should be convenient for the connection of ventilation ducts).
Safety equipment such as emergency showers, eyewash stations and fire extinguishers are usually placed on the left and right sides of the four doors.
On the left side close to the door, a fume hood, a side laboratory bench, a side reagent rack, a washing table and a wall cabinet are set up to accommodate large facilities and equipment.
On the left side of the window, there are Full Steel Laboratory Benches, work tables, reagent racks on the side tables, and places for placing large devices and equipment.
The space under the 7-window position can be used to set up side tables, test tables, and microscope tables, providing good vision during operation.
Laboratory classification layout plan
In modern experimental research institutions, laboratories are usually classified into physics, general chemistry, organic synthesis chemistry, and biology. When choosing equipment for graphic design, laboratories in different fields have different requirements, and the differences can be quite significant.
When designing a chemical analysis laboratory, a central bench for two-sided operation is usually placed in the center of the laboratory, with side benches, test benches, fume hoods, reagent cabinets, drying cabinets, etc. on both sides. Purification benches and constant temperature and humidity equipment are also provided as needed.
With the development of the physics industries such as pharmaceuticals, medicine, food, agriculture, forestry and animal husbandry, a highly reliable sterile and dust-free environment is indispensable in the laboratories of these fields. In a biological laboratory, consider the special requirements of data processing workflows ranging from general to inspection, testing, photography, photo development, etc. Usually, the washing counter and the drying counter can be coordinated at the inlet.
On the central Full Steel Laboratory Benches and side benches, reagent racks and universal supports are installed to place reaction tubes, extraction tubes and other equipment for different experimental purposes. Additionally, special gas piping and water supply and drainage pipes for cooling should be introduced on the laboratory benches. Universal supports for fixing equipment can also be installed inside the fume hood.
To facilitate the operation and use of analytical instruments, single-sided instrument benches are often placed in the center of the laboratory, while test benches are installed on the exterior walls. The piping for special gases used by analytical instruments should be as close as possible to the instruments.
Construction of laboratory facilities
I. Key Points for Laboratory Facility Construction
In terms of the safety of people, objects and the external environment, the comfort of the environment such as noise, odor and vision, the operability and functionality of equipment, as well as the convenience and intelligence of information processing, which are different from ordinary buildings, we have excellent designs and high-quality equipment to meet these requirements.
Ii. Electrical, water and gas piping
The piping methods for electricity, water, gas, etc. in a laboratory are of great significance during the design process. They must be comprehensively considered based on the content of the laboratory, the architectural form (high-rise or bungalow), as well as future expansion, safety, budget, and functionality. Through extensive practice, we can provide design and construction services for piping systems.
Iii. Supply Methods of Electricity, Water and Gas
There are generally two ways to supply power, water and gas to laboratories: horizontal supply and vertical supply. Take the central laboratory bench as an example to show the supply mode for the laboratory bench. For more Details : Email: chinalabfurniture@foxmail.com, Whatsapp : 0086 19970724683 .
