SUCLAB Laboratory Workbench With Drawers Manufacturers In China

October 15, 2024

Latest company news about SUCLAB Laboratory Workbench With Drawers Manufacturers In China

               SUCLAB Laboratory Workbench With Drawers Manufacturers In China

Wood Laboratory Workbench With Drawers Manufacturers are the modern laboratory preferred structure type. Structure of steel and wood with high strength bearing quality, good flexibility, excellent corrosion resistance, the use of humanization of real rooms, more convenient maintenance etc.

 Laboratory Workbench With Drawers Manufacturers Suspended System
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.

Framework uses 40*60*1.2 mm quality C type steel, joint is connected by cold rolled steel sheet stamping a integrated special fittings, making the whole frame structure more reasonable. The bearing performance and stability of the platform is especially strong; Steel surface by acid, phosphate, electrostatic powder spraying process, has the corrosion resistance, fire prevention, moisture-proof function etc. Surface treatment: C type steel frame in the production is completed, the pretreatment includes many steps: cleaning agents, aerosol spray, rinse water, passivation seal materials coating after the pretreatment of steel products in drying oven for drying and cooling; After cooling steel products to spray chamber in internal and external spray powder, its thickness at least 1.5 mils to finish bottom spray steel products immediately sent to the high temperature constant temperature box for grinding and chemical processing, in order to apply the test environment to use.

Quality isn't something that can be argued into an article or promised into it. It must be put there. If it isn't put there, the finest sales talk in the world won't act as a substitute."

Steel and Wood structure Laboratory Workbench With Drawers Manufacturers
Frame Framework uses 40*60*1.5 mm quality C type steel with 75μm epoxy resin powder coating,chemicals resistant.
MDF cabinet 18mm thick high pressure semi-solid wood (MDF) covered with 0.4mm high pressure laminate(HPL) on both sides with 3mm PVC edging strips.
Reagent shelves Shelf: made of 12mm thick frosted glass; Frame: made of 100*40*1.5mm steel tube coated with powders.
Height 850 or 900mm, (height adjustable 0-30mm)
Worktops 12.7/16/19mm thickness of Phenolic resin or other (Epoxy resin, ceramic, marble etc)
Structure Suspended System
Hinge DTC105 degree high quality hinge
Slideway Self-closing three section slide rail, no noise.
Handle Aluminum alloy embedded handle Or C type stainless steel handle
Accessories Socket, faucet, gas fitting, eyewash, pegboard, shelves, exhaust hood etc

 

In order to improve the experimental environment, the experiments carried out on the Laboratory Workbench With Drawers Manufacturers were gradually transferred to the fume hood. This requires that the fume hood should have the most suitable function for the use of the equipment. In particular, most newly built laboratories require air conditioning, so the number of fume hoods used must be included in the air conditioning system plan during the preliminary design stage of the building. Because the fume hood occupies a very important position in the biochemical laboratory, the number of fume etc.

 

 

latest company news about SUCLAB Laboratory Workbench With Drawers Manufacturers In China  0

 

 

latest company news about SUCLAB Laboratory Workbench With Drawers Manufacturers In China  1