What are Full Steel Laboratory Furnitures Materials ?
Full steel laboratory furniture materials (Durable, nice, with anti-corrosion, rust, moisture and other functions)
Steel using high-quality cold-rolled steel plate, through a die forming, the plate cutting, slotted, bending process, all welding cases of grinding and polishing processing, smooth not hurting hands. Surface after picking, phosphating and epoxy resin powder coating, with anti-corrosion, antirust and moisture-proof function.
The Worktop Materials are Below:
Phenolic resin
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion. Non-porous and non-conductive, it's strong durable qualities enable it to withstand high impact and shock. It is easily cleaned with soap and warm water.
Epoxy resin
Because of the natural resistance to corrosion, the industry has found it superior to any other top material for laboratory work. It is resistant to most organic and inorganic chemicals and is non-toxic. In addition, it is resistant to mechanical and thermal shock.
Suspended System
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.
Framework uses 40*60*1.5 mm quality C type steel, joint is connected by cold rolled steel sheet stamping a integrated special fittings, making the whole frame structure more reasonable. The bearing performance and stability of the platform is especially strong; Steel surface by acid, phosphate, electrostatic powder spraying process, has the corrosion resistance, fire prevention, moisture-proof function etc. Surface treatment: C type steel frame in the production is completed, the pretreatment includes many steps: cleaning agents, aerosol spray, rinse water, passivation seal materials coating after the pretreatment of steel products in drying oven for drying and cooling; After cooling steel products to spray chamber in internal and external spray powder, its thickness at least 1.5 mils to finish bottom spray steel products immediately sent to the high temperature constant temperature box for grinding and chemical processing, in order to apply the test environment to use.
Technical Parameters:
| Full steel laboratory furniture materials | |
| Frame | Framework uses 40*60*1.5 mm quality C type steel with 75μm epoxy resin powder coating,chemicals resistant. |
| Cabinet | 1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant. (Movable cabinets) |
| Reagent shelves | Shelf: made of 12mm thick frosted glass; Frame: made of 100*40*1.5mm steel tube coated with powders. |
| Height | 850 or 900mm, (height adjustable 0-30mm) |
| Worktops | 12.7/16/19mm thickness of Phenolic resin or other (Epoxy resin, ceramic, marble etc) |
| Structure | Suspended System |
| Hinge | DTC105 degree high quality hinge |
| Slideway | Self-closing three section slide rail, no noise. |
| Handle | Aluminum alloy embedded handle |
| Accessories | Socket, faucet, gas fitting, eyewash, pegboard, shelves, exhaust hood etc |
Full steel laboratory furniture materials Description
Worktop :
Experimental solid surface can be all steel plate, (epoxy, phenolic resins, granite, stainless steel countertops, ceramic and other, alternative), color black, gray and white are available for customers to choose.
Cabinet
Steel bench cabinets are made of thick domestic 1.0-1.2MM quality cold rolling steel plate, precision CNC punch press punching, CNC press brakes, gas shielded welding, polishing processing technology, such as molding, then after the pickling phosphate processing, chemical rust, acid and alkali resistance, high temperature epoxy electrostatic powder coating on the surface, load-bearing performance, long service life. View, reasonable overall load-bearing, anti-acid corrosion resistance is extremely high.
Reagents
Steel glass reagent racks, columns made of high quality 100MM*60MM*2MM steel rectangular hollow production. Layers panel: 10MM thick tempered plate power configurations: waterproof socket ladder-shaped, five-hole special socket, lighting, power switch socket using laboratory safety products. There is dust-proof, splash-proof, waterproof, acid resistant, alkali and other properties.
Accessories
Cabinet body part hinge, hinge: adopts domestic brand DTC hinge 105 and 175 degrees.
Part of rails of the Cabinet: can use three mute Guide, adjustable foot combination anchor, with anti-skid, shock, acid and alkali, the advantages of strong loading capacity is more suitable for use in a lab environment.
JIANGXI HUAHZIJUN TECHNOLOGY CO., LTD Advantages:
Our Factory was established in 2010.It has ten years production experience.
We have well laser cutting machine and automatic bending machine.
We have strong sales team and professional designer in foreign trade.
We have professional intallation service and three years warrenty.
Full Steel Laboratory Furnitures Materials Quality Control
Factory is very experienced and have already exported the products to many countries, especially in the Europe and US, Eastern European like Russia, Middle Asia like Uzbekistan, Kazakhstan, Middle East like UAE, Iraq, Jordan, Iran and many African countries.
"Treat customers sincerely, consider company reputation fastidiously and depend on high quality to win the success" is the management idea of the manufacturers. They sincerely hope to develop and cooperate with everybody, and establish long-term and stable operation relations finally with each other. Sincerely welcome the presence of the old and new customers.
Quality is the survival of the enterprise, our quality control department including: QC, IQC IPQC QA QE FQC . Certificates: ISO9001, ISO 14001 , OHSAS18001 etc.
What are Full Steel Laboratory Furnitures Materials ?
Full steel laboratory furniture materials (Durable, nice, with anti-corrosion, rust, moisture and other functions)
Steel using high-quality cold-rolled steel plate, through a die forming, the plate cutting, slotted, bending process, all welding cases of grinding and polishing processing, smooth not hurting hands. Surface after picking, phosphating and epoxy resin powder coating, with anti-corrosion, antirust and moisture-proof function.
The Worktop Materials are Below:
Phenolic resin
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion. Non-porous and non-conductive, it's strong durable qualities enable it to withstand high impact and shock. It is easily cleaned with soap and warm water.
Epoxy resin
Because of the natural resistance to corrosion, the industry has found it superior to any other top material for laboratory work. It is resistant to most organic and inorganic chemicals and is non-toxic. In addition, it is resistant to mechanical and thermal shock.
Suspended System
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.
Framework uses 40*60*1.5 mm quality C type steel, joint is connected by cold rolled steel sheet stamping a integrated special fittings, making the whole frame structure more reasonable. The bearing performance and stability of the platform is especially strong; Steel surface by acid, phosphate, electrostatic powder spraying process, has the corrosion resistance, fire prevention, moisture-proof function etc. Surface treatment: C type steel frame in the production is completed, the pretreatment includes many steps: cleaning agents, aerosol spray, rinse water, passivation seal materials coating after the pretreatment of steel products in drying oven for drying and cooling; After cooling steel products to spray chamber in internal and external spray powder, its thickness at least 1.5 mils to finish bottom spray steel products immediately sent to the high temperature constant temperature box for grinding and chemical processing, in order to apply the test environment to use.
Technical Parameters:
| Full steel laboratory furniture materials | |
| Frame | Framework uses 40*60*1.5 mm quality C type steel with 75μm epoxy resin powder coating,chemicals resistant. |
| Cabinet | 1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant. (Movable cabinets) |
| Reagent shelves | Shelf: made of 12mm thick frosted glass; Frame: made of 100*40*1.5mm steel tube coated with powders. |
| Height | 850 or 900mm, (height adjustable 0-30mm) |
| Worktops | 12.7/16/19mm thickness of Phenolic resin or other (Epoxy resin, ceramic, marble etc) |
| Structure | Suspended System |
| Hinge | DTC105 degree high quality hinge |
| Slideway | Self-closing three section slide rail, no noise. |
| Handle | Aluminum alloy embedded handle |
| Accessories | Socket, faucet, gas fitting, eyewash, pegboard, shelves, exhaust hood etc |
Full steel laboratory furniture materials Description
Worktop :
Experimental solid surface can be all steel plate, (epoxy, phenolic resins, granite, stainless steel countertops, ceramic and other, alternative), color black, gray and white are available for customers to choose.
Cabinet
Steel bench cabinets are made of thick domestic 1.0-1.2MM quality cold rolling steel plate, precision CNC punch press punching, CNC press brakes, gas shielded welding, polishing processing technology, such as molding, then after the pickling phosphate processing, chemical rust, acid and alkali resistance, high temperature epoxy electrostatic powder coating on the surface, load-bearing performance, long service life. View, reasonable overall load-bearing, anti-acid corrosion resistance is extremely high.
Reagents
Steel glass reagent racks, columns made of high quality 100MM*60MM*2MM steel rectangular hollow production. Layers panel: 10MM thick tempered plate power configurations: waterproof socket ladder-shaped, five-hole special socket, lighting, power switch socket using laboratory safety products. There is dust-proof, splash-proof, waterproof, acid resistant, alkali and other properties.
Accessories
Cabinet body part hinge, hinge: adopts domestic brand DTC hinge 105 and 175 degrees.
Part of rails of the Cabinet: can use three mute Guide, adjustable foot combination anchor, with anti-skid, shock, acid and alkali, the advantages of strong loading capacity is more suitable for use in a lab environment.
JIANGXI HUAHZIJUN TECHNOLOGY CO., LTD Advantages:
Our Factory was established in 2010.It has ten years production experience.
We have well laser cutting machine and automatic bending machine.
We have strong sales team and professional designer in foreign trade.
We have professional intallation service and three years warrenty.
Full Steel Laboratory Furnitures Materials Quality Control
Factory is very experienced and have already exported the products to many countries, especially in the Europe and US, Eastern European like Russia, Middle Asia like Uzbekistan, Kazakhstan, Middle East like UAE, Iraq, Jordan, Iran and many African countries.
"Treat customers sincerely, consider company reputation fastidiously and depend on high quality to win the success" is the management idea of the manufacturers. They sincerely hope to develop and cooperate with everybody, and establish long-term and stable operation relations finally with each other. Sincerely welcome the presence of the old and new customers.
Quality is the survival of the enterprise, our quality control department including: QC, IQC IPQC QA QE FQC . Certificates: ISO9001, ISO 14001 , OHSAS18001 etc.
